Products

This is an optional Team Associated "Hard" Front Suspension Arm Set for the RC10 B74 4WD Buggy. For the standard front arms, see part ASC92128. 

This is a replacement Team Associated Gearbox Set for the RC10B74 4WD Buggy. This set includes the upper and lower gearbox pieces; for use in the ...

This is an optional Team Associated RC10B74 Graphite Rear Hub Link Shim Set. Including two of each of the following sizes: 0.5mm, 1.0mm and 2.0mm....

This is a Team Associated Carbon Fiber Steering Block Arm set, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric...

Team Associated RC10SC6.4 Electric 2WD SC Team Truck Kit Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit. Based on...

The Proline RC10T6.2/Losi 22T 4.0 Axis ST 1/10 Stadium Truck Body. Featuring a low profile design that gives sharp lines throughout making for an a...

Team Associated RC10T6.4 Electric 2WD Team Stadium Truck Kit Team Associated RC10T6.4 Off Road 1/10 Electric 2WD Stadium Truck Team Kit. Based on t...

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel, with an included collet and four clutch shoe pins. 

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel Nut. 

The Team Associated Aluminum HRC Arm Mount "A" with High Roll Center positions the pivot point 1mm higher for increased ground clearance and greate...

The Team Associated Aluminum HRC Arm Mount "B" with High Roll Center positions the pivot point 1mm higher for increased ground clearance and greate...

This is a replacement Team Associated RC8 B3.1 Tall Rear Shock Tower. This shock tower is precision made from graphite material with the taller tow...

This is a replacement Team Associated Fuel Tank, intended for use with the RC8B3 nitro buggy. This package also includes fuel tubing clips and hard...

This is a replacement Team Associated Wing Mount. Like the Hot Bodies D815, this is a 1-piece wing mount which will be very lightweight. 

This is the optional Team Associated RC8B3.1 Underdrive Differential Gear Set. This gear set for the RC8B3.1 and RC8B3.1e V3 differentials is great...

This is a replacement Team Associated 46 Tooth RC8B3.1/B3.2 Spur Gear. 

This is an Essesntials bearing kit by Avid RC for the Team Associated RC8B3.1/B3.2/T3.1/T3.2. Includes:   6- 8x16x5 Revolution 4- 6x12x4 Revolution...

This is a pack of two replacement Team Associated Differential 15mm Outdrives, intended for use with the Team Associated RC8B3 Nitro Buggy. 

This is a pack of two optional Team Associated 17mm Differential Outdrives. These are used on the front/ceneter of the RC8B3.1/T3.1, where as the r...

This is an optional Team Associated 20mm Shock Rod End and Spring Cup Set. 20mm shock rod ends, spring cups, and collars allow a wider variety of 2...

This is a replacement Team Associated Arm Mount Insert Set, intended for use with the Team Associated RC8B3 Nitro Buggy. 

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps ...

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps ...

The Team Associated Factory Team 4-Shoe Adjustable Clutch System is a patent-pending clutch system that gives racers the ability to adjust the tens...

This is a replacement Team Associated Front Anti-Roll Bar Set, intended for use with the RC8B3 Nitro Buggy. This set includes three front bars in t...

This is a pack of two replacement Team Associated Gearboxes. This package includes two gearboxes that can be used in the front or rear location. 

This is a replacement Team Associated Hinge Pin Set, for use with the RC8B3 and RC8B3e 1/8 Buggy. This set includes 6 hinge pins.

This is a pack of four replacement Team Associated RC8 B3 Shock Mount Pins. These pins are used to secure the lower shock mount to the suspension arm.

This is a replacement Team Associated Steering Block Set, intended for use with the RC8B3 Nitro Buggy. This set includes one left and one right sid...

This is a replacement Team Associated 46 Tooth RC8B3.1E/B3.2E Plastic Spur Gear. 

Team Associated RC8 B3.2 Aluminum LRC Narrow Arm Mount "C". Tune your buggy or truggy to have increased rear grip and reduced turn-in with these L...

Team Associated RC8 B3.2 Aluminum LRC Narrow Arm Mount "D". Tune your buggy or truggy to have increased rear grip and reduced turn-in with these L...

This is a pack of four Team Associated Aluminum RC8B3.2 Shock Bushings. 

Team Associated RC8 B3.2 Body Posts & Bumper Set. Package includes replacement front bumper, front body post and rear body post compatible with...

This is a pack of three replacement Team Associated RC8B3.1 Differential Gaskets for use with the RC8B3.1 and RC8B3.1e. 

The Team Associated RC8B3 Factory Team Brass Chassis Weight is custom designed to fit the Team Associated RC8B3.1 and B3.1e buggies.Features: Mac...

Team Associated RC8B3.2 Factory Team Engine Mount Base. This engine mounting base is compatible with the RC8 B3 and T3 models and must be combined ...

Team Associated RC8B3 Factory Team Engine Mount Blocks. These engine mounting blocks are compatible with the RC8 B3 and T3 models and must be combi...

This is a pack of four replacement Team Associated Pillow Ball Nuts, intended for use with the Team Associated RC8B3 Nitro Buggy. These nuts are ma...

This is a replacement Team Associated Differential Case for the RC8B3.1 and RC8B3.1e. 

Team Associated RC8B4 Steering Blocks. Package includes two replacement steering blocks and pivot ball bushings. 

Team Associated RC8B4/RC8B4e Front Gearbox Set. This replacement front gear box is intended for the Team Associated RC8B4 or RC8B4e. Package includ...

Team Associated RC8B4/RC8B4e Front Lower Suspension Arms. These replacement suspension arms are intended for the Team Associated RC8B4 or the RC8B4...

Team Associated RC8B4/RC8B4e Rear Gearbox. This replacement gearbox housing is intended for the rear of the Team Associate RC8B4 or RC8B4e. Package...

1/8 Scale 4WD Nitro Off Road Competition Truggy Kit The RC8T3.1 has been overhauled with the latest upgrades from Team Associated! Many of the sam...

Team Associated RC8T3/B3.2 42.5mm Ti-Nitride Rear Shock Shafts. Package includes two replacement 42.5mm long ti-nitride rear shock shafts.

Product Overview The Avid receiver charging cable uses 4mm bullets to a female Futaba plug with 20awg wire and covered with a black nylon sleeve....