RC8B3.1 parts

This is an Essesntials bearing kit by Avid RC for the Team Associated RC8B3.1/B3.2/T3.1/T3.2. Includes:   6- 8x16x5 Revolution 4- 6x12x4 Revolution...

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch. 

Team Associated IFMAR 1/8 Buggy Wing. This is the updated, IFMAR legal wing for Team Associated B3 and T3 1/8 scale vehicles. Package includes one ...

This is a set of ten replacement HUDY 3x14mm driveshaft pins. Extend the life of your driveshafts and outdrives, by replacing the pins with these h...

Team Associated RC8T3/B3.2 42.5mm Ti-Nitride Rear Shock Shafts. Package includes two replacement 42.5mm long ti-nitride rear shock shafts.

VISION, a new reference for the 1/8 buggy Brushless class The VISION project stems from the desire to offer to the Off-road enthusiasts a high-pe...

Product Overview These wire grippers are used to organize your wires going from your speedy to battery but they have endless possibilities. Detai...

This is a set of four replacement header gaskets for the Team Associated off-road buggy.

This is a pack of three replacement Team Associated RC8B3.1 Differential Gaskets for use with the RC8B3.1 and RC8B3.1e. 

This is a replacement Team Associated Differential Case for the RC8B3.1 and RC8B3.1e. 

This is a pack of two replacement Team Associated 4-Shoe Composite Clutch Shoes.

This is a replacement Team Associated 46 Tooth RC8B3.1E/B3.2E Plastic Spur Gear. 

This is a replacement Team Associated Wing Mount. Like the Hot Bodies D815, this is a 1-piece wing mount which will be very lightweight. 

This is a replacement Team Associated Hinge Pin Set, for use with the RC8B3 and RC8B3e 1/8 Buggy. This set includes 6 hinge pins.

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps ...

This is a replacement Team Associated Arm Mount Insert Set, intended for use with the Team Associated RC8B3 Nitro Buggy. 

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel, with an included collet and four clutch shoe pins. 

This is the HB Racing 1/8 Rear Plastic Wing in Black color. This wing has no mounting holes and requires you to create your own. One wickerbill and...

This is a pack of two optional Team Associated 17mm Differential Outdrives. These are used on the front/ceneter of the RC8B3.1/T3.1, where as the r...

Team Associated Factory Team 16mm Big Bore Tapered Shock Pistons feature a tapered profile and angled holes to help improve handling through bumps ...

This is a replacement Team Associated Front Anti-Roll Bar Set, intended for use with the RC8B3 Nitro Buggy. This set includes three front bars in t...

This is a pack of four replacement Team Associated RC8 B3 Shock Mount Pins. These pins are used to secure the lower shock mount to the suspension arm.

This is an optional Team Associated 20mm Shock Rod End and Spring Cup Set. 20mm shock rod ends, spring cups, and collars allow a wider variety of 2...

This is a replacement Team Associated 46 Tooth RC8B3.1/B3.2 Spur Gear. 

This is a pack of four replacement Team Associated Pillow Ball Nuts, intended for use with the Team Associated RC8B3 Nitro Buggy. These nuts are ma...

This is a pack of ten replacement 3x24mm cap screws for the Team Associated off-road buggy. Used on the shock tower, shock bolts.

This is a replacement Team Associated Fuel Tank, intended for use with the RC8B3 nitro buggy. This package also includes fuel tubing clips and hard...

This is a pack of four Team Associated Aluminum RC8B3.2 Shock Bushings. 

Team Associated RC8 B3.2 Aluminum LRC Narrow Arm Mount "C". Tune your buggy or truggy to have increased rear grip and reduced turn-in with these L...

Team Associated RC8 B3.2 Aluminum LRC Narrow Arm Mount "D". Tune your buggy or truggy to have increased rear grip and reduced turn-in with these L...

This is a pack of three replacement Team Associated V2 Differential Case Gaskets. These gaskets are used in the front, center and rear differential...

This is a pack of four replacement Team Associated Aluminum Engine Mount Washers, intended for use with the RC8B3 Nitro Buggy. These washers are in...

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel Nut. 

The Team Associated Aluminum HRC Arm Mount "A" with High Roll Center positions the pivot point 1mm higher for increased ground clearance and greate...

This is a pack of two replacement Team Associated Differential 15mm Outdrives, intended for use with the Team Associated RC8B3 Nitro Buggy. 

This is a replacement Team Associated RC8 B3.1 Tall Rear Shock Tower. This shock tower is precision made from graphite material with the taller tow...

The Team Associated Factory Team 4-Shoe Adjustable Clutch System is a patent-pending clutch system that gives racers the ability to adjust the tens...

This is the optional Team Associated RC8B3.1 Underdrive Differential Gear Set. This gear set for the RC8B3.1 and RC8B3.1e V3 differentials is great...

This is a pack of two blue JConcepts "Finnisher" 1/8th Buggy Wing Buttons. In the 1/8th off-road world a securely fastened wing is critical during ...

This is a pack of two black JConcepts "Finnisher" 1/8th Buggy Wing Buttons. In the 1/8th off-road world a securely fastened wing is critical during...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm ...

This is a replacement Team Associated Steering Block Set, intended for use with the RC8B3 Nitro Buggy. This set includes one left and one right sid...

This is a replacement Team Associated Air Filter Foam Element. This element requires is dry and requires air filter oil. 

The Team Associated RC8B3 Factory Team Brass Chassis Weight is custom designed to fit the Team Associated RC8B3.1 and B3.1e buggies.Features: Mac...

Team Associated RC8B3 Factory Team Engine Mount Blocks. These engine mounting blocks are compatible with the RC8 B3 and T3 models and must be combi...

Team Associated RC8B3.2 Factory Team Engine Mount Base. This engine mounting base is compatible with the RC8 B3 and T3 models and must be combined ...

Team Associated RC8 B3.2 Body Posts & Bumper Set. Package includes replacement front bumper, front body post and rear body post compatible with...

The Team Associated Aluminum HRC Arm Mount "B" with High Roll Center positions the pivot point 1mm higher for increased ground clearance and greate...